Best Wet Tile Saw For the Money: Reviews and Complete Buyers Guide

If you have to deal with cutting and shaping tiles, ceramics, porcelain or marble on a frequent basis, you know about the importance of a good wet tile saw and just how much time and effort they can save. Before looking at the best wet tile saw for the money, we are going to first take a look at what a wet tile saw is to gain a better understanding of what these fantastic tools are capable of.

The ‘saw’ part of the of a wet tile saw (i.e. the bit that does all of the hard cutting work…) is usually made of diamond-edge carbide blade. Always remember, a grinder is not a saw because the circular carbide blades of a grinder make their way through a material by relentlessly grinding into it whereas saws are sharp-toothed metal blade capable of cutting the material despite grinding.

Now let’s look at where the ‘wet’ part of the wet tile saw comes in

An unavoidable part of the tile cutting process is the creation of chips and flying particles, which quite clearly are a potential hazard – particularly to the eyes. Although it is a good DIY practice to wear safety goggles!

Additionally, blades become very hot due to the friction and the speed of the cutting process. For this reason, a thin flow of water is continuously circulating at the cutting area as well. This serves to cool down the blade and the cutting material during cutting and effectively dampens down flying particles before they can become airborne and, therefore, a potential hazard.

Tiles can be very delicate when trying to cut, resize or shape them. Coming in different materials like porcelain, stones, ceramics and glass, they can easily break as they are hard. That’s why, when cutting them or resizing and shaping them, you need the best tile saw that money can buy.

Best Wet Tile Saws For the Money

$101.00
in stock
3 new from $101.00
1 used from $71.76
as of December 20, 2022 3:52 pm
Amazon.com
$110.16
in stock
5 new from $110.16
as of December 20, 2022 3:52 pm
Amazon.com
$167.83
in stock
as of December 20, 2022 3:52 pm
Amazon.com
$289.99
$334.60
in stock
4 new from $289.99
as of December 20, 2022 3:52 pm
Amazon.com
$749.00
$799.00
in stock
3 new from $749.00
as of December 20, 2022 3:52 pm
Amazon.com

1. SKIL 3540-02 7-inch Wet Tile Saw

Highlights
  • Made of stainless steel, which is corrosion-resistant and durable
  • The adjustable rip fence with a miter gauge
  • The reservoir that cools the blade
  • The double action of the cooling water
  • Bevel cuts range from 0-45 degrees.
  • Very cheap
  • Cutting delicate tiles might need a little practice
  • Not the best for professional jobs, suitable for only home operations and DIY `

If you are on a shoestring budget but still want to get the best wet tile saw for the money, this is the best option. Rated as the best on Amazon, SKIL 3540 is made of corrosive resistant stainless steel which is equally strong that it can support tiles up to 12” x 12” thanks to its sliding extensions on the sides.

It is also very flexible, allowing 0- 450 bevel for a wide range of cuts. There is also an adjustable rip fence with a miter gauge to ensure accuracy and straight miter cuts.

The surface, which is stainless steel, is very durable. A small reservoir system with which it comes cools the blade which runs through it. As the blade spins below the water, it sprays the cooling water which in turn cools down the dust.

The 4.2A motor is adequate and with this tile saw you will cut through any strong material without difficulty, and it comes with a 7” blade. As a result it doesn’t use a pump to cool the blade, but a splash system. This reservoir however is so small that it needs to be refilled occasionally.

Its cross capacity cut is 7.75” while the diagonal capacity cut is 7.25”.  SKIL 3540 weighs 17.7 lbs, making it light and very portable.

2. DEWALT D24000 Wet Tile Saw

Highlights
  • It is powerful, with a 1.5 horsepower, can cut the hard materials
  • The stainless steel rail system is so accurate for the cut
  • The water control is so excellent, together with those cleaning features
  • The cutting cart is removable
  • It comes with a 3-year warranty and one year free service
  • Its components need ultimate care so that they do not rust
  • It is a little bit noisy

With this 10-inch wet tile saw you will get reliable and accurate results faster and more efficiently. Manufactured by the legendary Dewalt, this saw integrated rail system not only helps ensure precise cutting but also allows you rip tiles and handle the diagonal cuts quickly.

This is also due to the integrated miter which allows you to cut the bevels accurately. You will handle even the toughest materials on the site using this saw, thanks to its 1.5 hp motor.

The tile saw has a 3 1/8 inch cut depth and a 24 inch ripping capacity. The integrated rail system is made of stainless steel with a dual, adjustable water nozzles giving you perfect water control. This is the fastest cutting tile saw, versatile with a powerful design.

The cutting cart is removable, making the cleaning of this tile saw easier, and the whole tile saw is compact, making its storage easy. Besides, one person can transport and set it up as it is only 69 lbs.

When you buy the Dewalt D24000 wet tile saw, you get a 3 year warranty, a year of free service and a three month money back guarantee. To stop it from sliding and slipping as you cut, this tile saw comes with a rubber top. Amazon reviews for this wet tile saw also paint a very good picture, if they are anything to go by.

3. Chicago Electric 2.5 Horsepower 10″ Industrial Tile/Brick Saw

Highlights
  • The tile saw comes with a powerful dual capacitor, thermal protection $ sealed bearings.
  • Compared to other tile saws, this one is bigger in size
  • The saw blade is equipped with heavy duty cast alloy and cutting head which reduces vibrations when cutting
  • The cutting head can be pivoted between 22.50 and 450.
  • This tile saw comes with a water pump and a removable easy-to-clean water tub
  • The big size can be troublesome if you want to store and travel with it
  • Unlike other tile saws, this one doesn’t come with a blade.

Manufactured by Harbor Freight Tools, this tile saw is some type of diamond in the rough. It has not been well marketed, neither does it look very fancy but it does thrice what a tile saw its price should do.

This tile saw comes with a ultra-powerful capacitor motor with a thermal overload protection plus sealed bearings. Its cutting head is two-position, allowing you to adjust the blade for various types of materials with their varying thickness, up to 3.5”.

A steel frame precision linear bar makes it bigger in size than most tile saws. The blade is furnished with a heavy duty cast alloy and cutting head to reduce vibrations during cutting.

Besides the robustness of this tile saw’s body, you can’t fail to notice the inbuilt 3 gpm water pump and the high-impact water tub which is not only removable but easy to clean as well. You can also pivot the head between 22.50 and 450 for bevel cuts. However, this tile saw doesn’t come with a blade like the rest.

4. SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock System

Highlights
  • The hydrolock system saves water by limiting it to the blade and minimizes the clean-up time
  • The aluminum table is rust-resistant and durable
  • It is light, weighing 24 pounds making sawing easy
  • It easy cheap, compared to other wet tile saws
  • It has out-of-the-box features unavailable in other wet tile saws
  • This tile’s blade guard is plastic, which questions its durability
  • This motor is not powerful enough to handle bigger projects

This top rated wet tile saw is designed to give you confidence and professionalism in tiling at an incredibly cheap price. Its upper and lower guard design keeps the water near and limited to the blade minimizing the clean-up time.

The aluminum table is durable and rust-resistant, while the sliding side extensions can support tiles measuring up to 18”. With the bevel, you can perform different types of cuts at 00, 22.50 and 450. The accuracy of these cuts is made easier with the adjustable rip fence with miter gauge. It comes with a 3-year warranty.

5. QEP 650XT 22650Q 3/4 HP Tile Saw

Highlights
  • It is easy to set up and operate for beginners as well as experts
  • The ¾ hp motor generates 3,600 RPM enough to complete any task
  • The cutter and stopper are adjustable
  • It is very silent, compared to other tile saws
  • It needs extra care when using it to cut delicate tiles as it requires stability

For beginners, this is the best wet tile saw. Primarily designed to cut ceramic and porcelain materials, QEP 650XT’s 7” continuous diamond rim saw blade can still cut through granite, marble and stone tiles. Its ¾ hp motor can generate 3,600 RPM which can help in various task completion. Its frame is rectangular-shaped, with an adjustable cutter and stopper. This is the most silent tile saw in this list when cutting.

6. MK Diamond MK-145 Wet Tile Saw

Highlights
  • Powerful 115-volt, 4-amp direct drive motor
  • Rated at 1/2-horsepower
  • Capable of cutting 45-degree and 22-1/2-degree miters
  • Runs off of standard household current
  • Includes 4-1/2-inch tile blade
  • Lightweight at 11-pounds with a compact and versatile design
  • It has a cheap plastic build

If you want to avoid paying out good money to home improvement firms, a good tile saw such as the MK Diamond MK-145 Wet Tile Saw can be worth its weight in gold – or even diamond! You can use it for cutting tiles wherever you need to – kitchen, bathroom or floor tiles can all be handled if you select the right model.

The Diamond wet tile saw really lives up to its name, and it will prove itself invaluable again and again – you’ll have a hard time finding anything that can outshine it for your DIY projects. Better yet, it can pay for itself almost at once. Click below to check the reviews at Amazon.com.

This great workhorse of a tile saw is just 5.1 by 17.5 by 18 inches in size, and weighs just a fraction over 14 pounds, making it maneuverable in a way that’s very reassuring. Its 4 1/2 inch tile blade can deal with both 22 and 45 miter corners with perfect precision, thanks to the miter table integrated into the unit.

The motor has what it takes, too – it’s a 4 amp, 1/2 hp unit that runs to 5,500 rpm. As the MK Diamond MK-145′s design is similar to a table saw’s, it’s also easy to get to grips with, even if you don’t have much experience of cutting tiles. It also has the sliding water tray built into the base, which is a fantastic time-saver.

Choosing a wet tile saw is not an easy task, but we hope we have made it easier for you. Consider your personal needs and the environment where you’re going to use it. Wet tile saws are the best option when buying saws as we saw above, but they come in many styles.  Read through the above information, make the right choice and go for it.

What to Consider When Shopping for Wet Tile Saws

This post is for those asking themselves whether they should rent or buy a tile saw and then after making that decision, what type of wet saw to use for your tile project. Below are the answers to those questions and a little more. Please let me know if this helps you in your decision on which tile saw to buy.

Okay, you have decided to replace your carpet with ceramic tile. Or, perhaps you are feeling even more adventurous and plan to tile your entire bathroom. You can see it now; the floor in mosaic, walls in marble and shower floor in glass. This article focuses on tile tools so I’ll omit any discussion about tile selection, preparation and application. Will you need a tile saw? Should you rent one for the weekend? Should you just measure the pieces to be cut and take them to a tile shop to be cut? What about using a manual score and break cutter?

Over the years I have done a few tile jobs and think I can help you decide. My approach to any job is to do it right. I want a perfect job and I’m willing to put in the effort to do it right. I don’t want to spend a lot of money but if I need to buy something to get the job done I’ll do it. The answer is simple. So simple, you will spend the next few hours questioning the logic. Ready, here it is. You need a wet saw, manual tile cutter and tile nippers. And, depending on how many intricate rounded or 90 degree cuts the project dictates you will also want to buy few ceramic tile blades for your jig saw.

About now you are probably wondering why anyone simply doing one small bathroom or floor would want to invest in this equipment. Here’s why; these tools will simplify your life and provide a more finished looking product. Renting is an option if you know what you are doing. Otherwise, you will be in such a rush to finish and return the saw project quality will suffer. Instead, use some of the labor dollars you are saving by tackling this project and purchase yourself some low to medium level equipment. The cost of buying versus renting will be fairly close. Buying the best isn’t necessary for a couple of small do it yourself tile jobs. The low to mid range equipment provides clean straight cuts at a fraction of the price. This range of tool may not be quite as efficient or lasting but it will without a doubt outlast your needs. And more importantly you can take your time and do the job right. Some times you may find yourself making several cuts to get that perfect fit.

Saw blades; a new saw, of any level, cuts tile like a dream. Its time to replace the blade when you need to push instead of just guide the tile. Tile saws, also called wet saws use water to cool the blade as it cuts the tile. A reservoir holds the water and needs to be refilled often. Higher end saws may maintain a constant level in the reservoir while the entry level units require the user to manually check and fill the reservoir. Another main difference between inexpensive and high dollar wet saws is how the cut is performed. With low end units you push the tile into the blade. The high dollar saws makes the cut by pulling the blade across a stationary tile. This method requires less effort and is more precise because the tile doesn’t move and the blade is pulled along fixed shaft. If you are familiar with radial arm saws then this should make sense. Another factor in selecting a tile saw is the size and thickness of the tile to be cut. As you might guess larger and or thicker tile requires larger more professional grade equipment to cut.

A few words on manual tile cutters, nippers, jig saw blades and maybe hole saws. Compared to a wet saw or the materials these are cheap and you will need them. Believe it or not, sometimes its faster and easier to make a straight cut with a manual tile cutter than using your wet saw. Nippers allow you to clean a cut or produce an odd shape. Jig saw blades do a good job on the intricate cuts. Hole saws, as the name implies lets you cut a hole in the tile. Holes saws aren’t essential but if you have a pipe to tile around they produce a nice look. Otherwise you cut the tile in two and cut a semi-circle in each half. This is a common method and looks good but it could look better.

The final cut, if money is no object and you like cool tools the high dollar saw is probably the one for you . Otherwise I recommend that entry level do-it-yourself tile setters purchasing whatever entry or mid level saw that fits the job at hand. Over purchasing is a waste. However, if you plan to become a professional tile setter then spring for the best tool you can afford. If not you will spend more time and effort than necessary finishing your jobs and repairing your equipment.

A tile saw is a unique and special tool that is designed to cut tiles precisely and efficiently. A tile saw is likely to take off all the burden from your shoulders as it works efficiently. There are two main types of tile saws; handheld saws and the table saws.

Handheld Tile Saws

Handheld saws, as the name suggests, can work while held by your hands.  These are smaller tile saws compared to the table saws. They have smaller blades with and are efficient when cutting smaller tiles.

Handheld saws are portable and you can use them in external operations. You can walk with them as they are light.

However, they are not the best choice if you want to cut larger tiles or deep cuttings. When using them on smaller tiles, you need to ensure that the tiles are properly secured by clamping them down. You also need to manually mark the tiles before you start cutting them, both of which need sufficient preparation before you finally start the cutting.

Best handheld wet saw

Handheld tile saws can either be dry, wet or dry wet. Dry handheld saws lack a motor hence will in most cases overheat when performing multiple or deeper cuts.

The wet handheld saw, on the other hand, requires water flow to operate while a dry wet handheld saw operates on both conditions. It is important to note that these saws require expertise and extra carefulness hence you should only buy if you are a professional in handling tile saws.

Table Tile Saws

Best table tile saws for the money

Table tile saws are large, with huge blades that make it the best option when performing cuts. They provide extra smoothness, deep cuts in thick tiles and can be used to make multiple cuts.

To achieve specialty cuts using these type of saws, you need some other add-ons like miter tool or bevel. Although these saws (Table tile saws) are considered expensive, the money you spend on one is worth it as you will see in the reviews below.

Dry, Wet or Dry-Wet Tile Saws?

A wet tile saw is the simplest saw and the best choice for any beginner. It is easy to use, operate and provides some seamless operations with some of the best cuts you’ll ever see.

It is known as wet because it uses water to cool its blade down. Due to repeated cuts that go for a long time, this tile saw is likely to overheat and damage, hence the essence of water. The water cools down the blade, lubricates the tiles and helps keep the dust away.

Dust is unhealthy and wet tile saws are the best when it comes to user-mindedness. For this reason, we recommend that if you’re going to look for a tile saw to purchase, then narrow your search down to a wet tile saw, cool? Cool.

Buying the Best Wet Tile Saw, Considerations

A good tile saw should be able to cut both hard and fragile tiles with all angles, without causing the least damage to them. But how do you pick the best wet tile saw? What are the features that you need to look out for?

There are so many wet tile saws in the market right now. Choosing the best of them, you’ll have to consider the following;

  • Water source. A wet tile saw needs water to continue working and in most cases, it reuses water or draws it from some source, mostly a water hose. Both of these types of wet tile saws have benefits and deficits. A wet tile saw that reuses water will allow you to work away from a water source, hence your movement won’t be limited. It has a pump with an interconnections that ensures used water goes back to the pump for reuse, while the water will surely get dirty and dirtier. On the other hand, a wet tile saw with a hose will limit you to be a given distance away from a water supply, but the water will be clean and cold. You need to consider your water source, and what will work for you.
  • Blade type. For your information, blades differ on applications. Some blades are meant for dry/handheld tile saws while the rest are for wet tile saws. The latter need constant supply of water to work, the former don’t. You need to be sure of the blade.
  • Blade capacity. This is a feature determining the ability of the cutting head to hold different blades with different sizes. It’s recommended that you go for a wet tile saw whose blade capacity is broad, with a versatility that will be applicable in the different projects you might come through.
  • Blade adjustment. Different tile projects require different adjustments, with most of them requiring beveled and mitered cuts. Look at the different types of adjustments that the blade can allow.
  • Blade size and power. A big blade will most definitely cut big tiles with ease. The size determines the depth and the diameter. While most of them range between 4.5” to 10”, the recommended size of a blade is 7. The blade power is the torque provided by the horsepower to cut that tile. This is what decides whether the tile saw will cut large or small tiles.
  • Thermal overload protection. With the motor working non-stop, the possibility of overheating and even burning up is very high. To avert this, most of these tile saws come with a thermal overload protection. The motor is direct drive and with little help from water to cool it down, the protection ensures total safety.

Before you buy a wet tile saw, ensure to check all these factors, otherwise you’ll buy a tile saw only to be disappointed later. But hey, let’s make it easy for you. Here are the best five wet tile saws at the market currently, reviewed to make it easy for you to make a choice;

Joseph Andersen

Joseph Andersen

Hello, my name is Joseph Andersen and I am a certified work safety expert with over a decade of experience in the field. I hold a number of certifications, including OSHA 30-Hour Construction Safety and Health, OSHA 10-Hour General Industry Safety and Health, and a First Aid/CPR/AED certification. I am skilled in developing and implementing safety protocols and procedures, as well as training and educating employees on proper safety practices.

We will be happy to hear your thoughts

Leave a reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

GNM Networks
Logo